EasyPro Submersible Magnetic Drive Pump 200 GPH

EasyPro Mag Drive Pumps stand out from the crowd in features, benefits and durability. With 16 models ranging from 200 gph to 9460 gph, EasyPro offers a model for just about any need! For low head applications Mag Drive Pumps are unbeatable and with few moving parts, their reliability is unsurpassed.

Details

EP200 200 GPH Submersible Mag Drive Pump with Volcano and Waterbell Fountain Nozzles

EasyPro Mag Drive Pumps stand out from the crowd in features, benefits and durability. With 16 models ranging from 200 gph to 9460 gph, EasyPro offers a model for just about any need! For low head applications Mag Drive Pumps are unbeatable and with few moving parts, their reliability is unsurpassed.

• Mag drive motors – super quiet and very energy efficient!
• Epoxy filled motors – no oil!
• Foam prefilter included on all pumps 200 gph through 1350 gph. Larger pumps have screened inlet but no foam.
• Flow restrictor valve included with each fountain set, 600 gph – 1350 gph fountain sets include diverter valve allowing you to run a fountain nozzle and a waterfall at one time
• We offer a three year limited warranty! EasyPro Mag Drive Pumps are built durable, over 98% of these are still running after three years!
• Free fountain set with all 200 – 1350 gph pumps
• Threaded discharge ports on all pumps for easy fitting connection

Additional Information

• Case Quantity 12
• Max Flow Rate 200 gph
• Dimensions 6.5"L x 3.5"W x 3.625"H
• Power Cord Length 12'
• Voltage 115v
• Amps 0.23 A
• Watts 17 Watts
• Maximum Head 7'
• Outlet 1/2"
• Warranty 3 years

Frequently Asked Questions

1. What is the EasyPro 200 GPH Submersible Magnetic Drive Pump?

The EasyPro EP200 is a compact submersible magnetic drive pump designed for small ponds, garden fountains, tabletop water features, and other low-head water circulation applications. Its energy-efficient motor, quiet operation, and included fountain nozzles make it a convenient choice for decorative water features.

2. What is the maximum flow rate of the EasyPro EP200 pump?

The EasyPro EP200 has a maximum rated flow rate of 200 gallons per hour (GPH). Actual water flow depends on the pumping height, tubing size, pipe length, fittings, and other restrictions in your water feature system.

3. How much electricity does the EasyPro 200 GPH pond pump use?

The EasyPro EP200 consumes approximately 17 watts of power and operates on a 115-volt electrical supply. Its magnetic drive design provides efficient water circulation for small ponds and decorative fountains.

4. What is the maximum head height of the EasyPro EP200?

The EasyPro EP200 has a maximum rated head of 7 feet. This is the maximum lifting height, not the height at which the pump delivers its full 200 GPH flow rate. Water output decreases as lifting height and plumbing resistance increase.

5. Is the EasyPro EP200 suitable for small ponds?

Yes. The EasyPro EP200 is designed for small ponds and low-head water features that require modest water circulation. Consider the pond size, desired circulation rate, and plumbing layout to determine whether its 200 GPH maximum flow is sufficient for your application.

6. Can the EasyPro 200 GPH pump be used for a fountain?

Yes. The EasyPro EP200 includes volcano and waterbell fountain nozzles for creating decorative water displays. Fountain height and appearance depend on water depth, nozzle setup, and the pump's available flow at the installed height.

7. Can I use the EasyPro EP200 for a small waterfall?

The EasyPro EP200 may be suitable for a very small, low-head water feature if its available flow meets your design requirements. For larger waterfalls or features requiring greater water volume, consider a higher-capacity pump.

8. What size outlet does the EasyPro EP200 pump have?

The EasyPro EP200 features a threaded 1/2-inch discharge outlet for connecting compatible fittings and tubing. Using suitable tubing and minimizing unnecessary restrictions can help maintain water flow.

9. How long is the power cord on the EasyPro EP200?

The EasyPro 200 GPH Submersible Magnetic Drive Pump includes a 12-foot power cord. Plan your installation so the cord can reach a suitable power supply safely, following the manufacturer's instructions and applicable electrical codes.

10. Is the EasyPro EP200 quiet during operation?

Yes. EasyPro magnetic drive pumps are designed for quiet operation and energy efficiency. Proper positioning, secure tubing connections, and a clean intake can help minimize unwanted vibration and operating noise.

11. Is the EasyPro EP200 safe for fish ponds?

The EasyPro EP200 has an epoxy-filled motor and an oil-free design, helping eliminate the risk of motor oil leaking into pond water. Follow the manufacturer's instructions and maintain suitable water conditions for fish and other aquatic life.

12. Does the EasyPro EP200 include a prefilter?

Yes. The EasyPro EP200 includes a foam prefilter that helps capture debris before it enters the pump. Clean the filter regularly to prevent blockages and maintain proper water flow.

13. Can the EasyPro EP200 run continuously?

The EasyPro EP200 is designed for pond and water feature circulation. Follow the manufacturer's operating instructions, maintain an unobstructed intake, and ensure the pump is installed and operated under the specified conditions.

14. What warranty comes with the EasyPro 200 GPH pump?

The EasyPro EP200 comes with a three-year limited warranty. Refer to the manufacturer's warranty terms for coverage details, exclusions, and any applicable installation or maintenance requirements.

15. How do I maintain the EasyPro EP200 Submersible Magnetic Drive Pump?

Inspect and clean the foam prefilter regularly, check the intake for debris, and remove any buildup that may restrict water flow. Always disconnect the electrical supply before cleaning or servicing the pump, and follow the official EasyPro Mag Drive Pump manual.

16. How do I choose the right EasyPro pump for my fountain or pond?

Choose a pond pump based on the required gallons per hour, vertical lift, tubing size, and plumbing resistance. The EasyPro EP200 is intended for small, low-head applications with a maximum rated flow of 200 GPH and a maximum head of 7 feet. Check the manufacturer's performance data to estimate actual flow at your installation height.