Atlantic MD1000 Tidal Wave MD-Series Pump 1080 GPH

Atlantic Tidal Wave MD-Series submersible pond pumps are the perfect choice for ponds, waterfalls, filters and fountains. These submersible pumps are heavy-duty, equipped with removable pre-filters and replaceable impeller assemblies. Large, stable base for anchoring pump may be removed in tight applications. Included outlet fittings are tapered to fit a variety of tubing types and sizes. Front end impeller assembly can be removed with a quick quarter turn for easy periodic cleanings. Mag-drive technology makes this pump extremely energy efficient, saving hundreds of dollars over traditional pumps. 

• Energy efficient mag-drive technology
• Removable pre-filter
• Included barbed outlet fitting
• 20 ft power cord

Frequently Asked Questions

1. What is the Atlantic MD1000 TidalWave MD-Series Pump?

The Atlantic MD1000 TidalWave MD-Series Pump is a magnetic-drive pond pump designed for reliable water circulation in smaller ponds, waterfalls, fountains, and decorative water features. With a maximum flow rate of 1,080 gallons per hour (GPH), it is a practical option for pond owners who need dependable water movement in a compact, easy-to-maintain pump.

2. What is the maximum flow rate of the Atlantic MD1000 Pond Pump?

The Atlantic MD1000 has a maximum flow rate of 1,080 GPH under low-head conditions. Actual water flow decreases as pumping height and plumbing resistance increase. Consider your system's total dynamic head when selecting this pump for a pond, waterfall, or filtration setup.

3. How much water does the Atlantic MD1000 pump at different heights?

According to the manufacturer's MD-Series flow chart, the Atlantic MD1000 delivers approximately 785 GPH at 5 feet of head and 275 GPH at 10 feet of head. Flow decreases as the pumping height increases, so account for vertical lift, pipe length, fittings, and other plumbing restrictions when planning your water feature.

4. Is the Atlantic MD1000 suitable for pond waterfalls and fountains?

Yes. The Atlantic MD1000 TidalWave Pump can power appropriately sized small waterfalls, fountains, and decorative water features. Before purchasing, check the required flow rate and pumping height to ensure the pump can provide sufficient water for your specific installation.

5. Can the Atlantic MD1000 be used for pond filtration?

Yes. The Atlantic MD1000 can circulate water through a compatible pond filtration system. Choose a filter that supports the pump's flow rate and suits your pond's requirements. Regularly inspect and clean the pump's removable pre-filter to help maintain consistent water circulation.

6. What type of pump is the Atlantic MD1000?

The Atlantic MD1000 is a magnetic-induction, or Mag Drive, pump. Its design provides dependable water movement for smaller ponds, waterfalls, and fountains. The MD-Series features a serviceable impeller assembly, a removable pre-filter, and an oversized ceramic shaft designed to help reduce internal wear.

7. How much electricity does the Atlantic MD1000 use?

The Atlantic MD1000 operates on a 115-volt power supply and has a rated power consumption of 90 watts. Actual electricity use depends on operating conditions and how long the pump runs. Follow the manufacturer's electrical safety instructions and use a properly grounded, GFCI-protected outlet for pond equipment.

8. What size inlet and outlet connections does the Atlantic MD1000 have?

The Atlantic MD1000 features a 1½-inch MIPT inlet and a 1-inch MIPT outlet. It includes a stepped outlet fitting for compatible tubing and a 1-inch FIPT to 1½-inch FIPT adapter for suitable plumbing applications. Check your pipe and fitting sizes before installation.

9. Does the Atlantic MD1000 include a pre-filter?

Yes. The Atlantic MD1000 includes a removable pre-filter that helps prevent debris from entering the pump. Clean the pre-filter regularly to reduce blockages and help maintain water flow. Always disconnect the pump from the power supply before cleaning or servicing it.

10. What is the maximum head height of the Atlantic MD1000 Pond Pump?

The manufacturer's flow chart lists the Atlantic MD1000 at approximately 275 GPH at 10 feet of head, with no listed flow at 15 feet in the chart. Select this pump for installations where the required flow falls within its recommended operating range, and consult the manufacturer's manual when calculating total dynamic head.

11. What are the dimensions and power cord length of the Atlantic MD1000?

The Atlantic MD1000 measures approximately 5½ inches long, 4¼ inches wide, and 5½ inches high. It includes a 20-foot power cord, providing flexibility for suitable pond and water-feature installations. Allow enough room for plumbing connections, cleaning, and routine maintenance.

12. What warranty comes with the Atlantic MD1000 TidalWave Pump?

The Atlantic MD1000 TidalWave MD-Series Pump comes with a 5-year limited manufacturer's warranty. Review the manufacturer's warranty terms for coverage details, installation requirements, and exclusions, and retain your proof of purchase.